Godhand: Brushes - Brushwork Deluxe - Point Brush (M)

Brushwork Deluxe Point Brush M

The brushes are suitable for painting wide surfaces and large-scale models.
The brush tips are quite big, so they retain paint and water very well.
It’s suitable for precise drawing of narrow lines or faces of large-scale models.

Each brush is hand-made by Japanese brush craftspersons who specialize in synthetic bristles.
Animal hair brushes tend to become damaged, torn, and dry when soaked in solvents, but Brushwork PRO’s PBT bristles are solvent-resistant and less prone to damage.
The bond that holds the brush tip in place is also solvent-resistant, ensuring a long-lasting good brush tip.
The brush tip is more flexible than general chemical fiber brushes due to the firmness adjusted for easy brush painting on models.
An assorted range of brush tip shapes for use in different painting situations.
Short brush tip has a lower water supply for the paint, causing the paint to dry quickly.
This is why Brushwork PRO has designed the brush tip length to achieve ease of painting and paint absorbency.
Thanks to the special processing PBT bristles, bent bristles become straight again with hot water at 90℃.

How to fix a brush with bristles bent out
Remove any dirt from the brush before soaking it in hot water.
*Please be careful of burns when using hot water.

1. Fill a heat-resistant container with hot water at 90℃, and soak the bent brush tips for about 10 seconds.
2. Use the sides of the container to straighten out any bent bristles.
3. Pull the brush up along the side to keep it straight.
4. Check the bottom of the brush is straight and leave it to dry.

• For some bristles with a limited lifespan in use, it may not work.
• Note that if the water gets cold during the process, it may not work.
• Brushwork Deluxe Point Brush M
• Product Code: GH-EBRSDP-MSC